-
3 pin or 5 pin diagnostic connector (DLC)
All Honda models produced in 1992 - 2001 (gasoline engines only) that use the 3 pin or the 5 pin diagnostic connector (DLC) are compatible with Hondash. If you can find either the 3 pin or the 5 pin diagnostic connector in your car, your ECU is compatible.
Connector style Number of wires 3 pin connector 3 wires 2 wires (requires an external power source) 5 pin connector (requires 5 to 3 pin adapter) 5 wires 3 wires
Market OBD United States, Canada '92-'95 (OBD1 only) Worldwide
(Europe, Japan, Australia, Russia, Brazil, etc...)'92-'01 (OBD1/2A/2B)
*some markets until '03 -
Immobilizer
If the ECU was originally equipped with an immobilizer and it was modified or physically removed, etc., you may not be able to use Hondash (does not apply to ECUs that don't have an immobilizer from the factory).
The only confirmed way to bypass the immobilizer whilst not breaking the diagnostic port functionality is by using Doctronic's Mobilizer A0 module. -
Aftermarket / chipped / swapped ECU and other mods
If you're using an aftermarket / remapped / chipped ECU etc., refer to the general compatibility guidelines, otherwise if you swapped ECU and/or wiring harness etc., follow the wiring guide and make sure your setup is compatible
▼